Basement Insulation in High Park
Cold basement walls pull heat from your home and create condensation that leads to mould and musty odours. Closed-cell spray foam creates a thermal break and vapour barrier in one application—warming your foundation walls and eliminating moisture problems.
Signs Your High Park Basement Needs Insulation
Most High Park homes—especially older properties in High Park North, Roncesvalles, and Bloor West Village built before 2005—have uninsulated or poorly insulated foundation walls. Here's how to tell.
Cold Floors Above
If your main floor feels cold even with the heat running, your uninsulated basement is pulling warmth down through the subfloor. A thermal break on foundation walls fixes this.
Condensation on Walls
Water droplets or damp patches on concrete walls mean warm interior air is hitting cold foundation surfaces. This moisture feeds mould and damages framing.
Musty Odour or Mould
That damp basement smell is moisture trapped between concrete and fibreglass batts—the perfect environment for mould. Spray foam eliminates the air gap where condensation forms.
High Heating Bills
Uninsulated foundation walls account for 20–30% of your home's total heat loss. Insulating the basement is one of the highest-ROI energy upgrades you can make.
Sagging Fibreglass Batts
Old fibreglass insulation in basement walls traps moisture against concrete, loses R-value when damp, and sags away from the wall creating air gaps. It needs to be replaced, not patched.
Unusable Space
A cold, damp basement isn't a living space—it's wasted square footage. Insulating foundation walls is the first step to turning your basement into a comfortable room.
Open-Cell vs Closed-Cell for High Park Basements
For basements, closed-cell is almost always the right choice. Here's why.
| Feature | Open-Cell (½ lb) | Closed-Cell (2 lb) |
|---|---|---|
| R-Value per Inch | R-3.7 | R-6.5 |
| Vapour Barrier | No — vapour permeable | Yes — at 2" thickness |
| Moisture Resistance | Absorbs water | Waterproof |
| Structural Strength | Flexible, no racking strength | Adds wall rigidity |
| Mould Resistance | Can harbour moisture | Does not absorb water |
| Thickness for R-20 | ~5.5 inches | ~3 inches |
| Cost per Sq Ft | $1.50 – $3.50 | $2.50 – $4.50 |
| Best For Basements? | Only if exterior is waterproofed | Recommended for all High Park basements |
Not sure which is right for your basement? We'll assess moisture conditions during your free site visit.
Where We Apply Basement Spray Foam
Complete basement insulation means more than just the walls. We seal every surface where heat escapes and moisture enters.
Foundation Walls (Full Height)
From sill plate to floor slab. Full-height coverage creates a continuous thermal break and vapour barrier across the entire foundation.
Rim Joists
The wood band where your floor system sits on the foundation. One of the biggest air leakage points in any home—spray foam seals it completely.
Sill Plate
The wood-to-concrete connection where air infiltrates. Spray foam bridges this gap and stops drafts from entering at the foundation top.
Window Wells & Bucks
Around basement window frames where gaps allow cold air and moisture in. We seal the entire perimeter of each basement window.
Utility Penetrations
Every pipe, wire, duct, and conduit that passes through the foundation is a potential air leak. We seal each one during application.
Cold Room / Storage Areas
Uninsulated cold rooms connected to the foundation lose heat and introduce moisture. We can insulate or isolate them from your conditioned space.
How Basement Insulation Works
From quote to completion—most High Park basement jobs are done in a single day.
Free Site Assessment
We inspect your basement, check for moisture issues, measure wall area, and assess existing insulation. You get a detailed written quote.
Prep & Protection
We mask floors, cover belongings, set up ventilation, and remove any old fibreglass if needed. Your basement is protected throughout.
Spray Application
Closed-cell foam is applied to foundation walls, rim joists, and sill plate to the specified thickness—typically 2–3 inches for code compliance.
Inspection & Cleanup
We verify thickness and coverage, trim any excess foam, clean up completely, and walk you through the finished job. Ready for framing and drywall.
Why High Park Homeowners Choose GTA Foaming
Local expertise, honest pricing, and work we stand behind.
Serving High Park
We're based in nearby Woodbridge and serve all High Park area neighborhoods daily. Fast response times across High Park North, Roncesvalles, Bloor West Village, and beyond.
Fully Licensed & Insured
Full liability insurance, WSIB coverage, and installations that meet or exceed Ontario Building Code requirements.
Upfront Pricing
Detailed written quotes before any work starts. No hidden fees, no surprises. We price per square foot so you know exactly what you're paying.
Real Job Photos
We document every project with before and after photos. Check our High Park project gallery to see our work.
Same-Day Quotes
Contact us in the morning, get a site visit and written quote the same day. We know High Park homeowners don't want to wait weeks.
Code-Compliant Installs
R-20 minimum for High Park basement walls (Climate Zone 6) per Ontario Building Code. We don't cut corners on thickness or coverage.
High Park Neighbourhoods We Serve
Fast basement insulation service throughout High Park and surrounding communities.
Your Neighbourhood Not Listed?
We serve all of High Park area and the surrounding GTA. Call for a same-day quote.
Call (647) 613-3626What High Park Homeowners Say
Real feedback from basement insulation projects across High Park.
"Our century home in Roncesvalles had a perpetually damp and freezing basement. GTA Foaming removed all the old, failing insulation and applied closed-cell spray foam to the entire foundation. The transformation is remarkable—no more moisture, no more cold floors, and our heating bills dropped significantly."
"We're in High Park North and needed spray foam for a basement renovation. The GTA Foaming crew was punctual, professional, and finished everything in a single day. The basement is now warm enough to use year-round. Great experience from quote to completion."
"Living in Bloor West Village, we struggled with basement moisture for years. After having closed-cell spray foam installed by GTA Foaming, the musty smell is completely gone and the space stays dry. The price was fair and the work quality exceeded expectations. Highly recommend for anyone in the High Park area."
Ontario Building Code for High Park Basements
What you need to know about basement insulation requirements for homes in Climate Zone 6.
R-20 Minimum Required
Ontario Building Code specifies R-20 minimum for basement walls in Climate Zone 6 (High Park). With closed-cell at R-6.5/inch, 3 inches meets or exceeds code.
Vapour Barrier Built In
Closed-cell spray foam at 2 inches or more acts as a Class II vapour retarder—no additional poly sheeting required. This simplifies your basement finishing process.
Thermal Barrier Required
Exposed spray foam requires a 15-minute thermal barrier (typically drywall) in finished living spaces. We ensure compliance with all fire safety requirements.
Basement Insulation FAQ — High Park
Common questions about basement spray foam insulation for High Park homes.
Ontario Building Code requires minimum R-20 for basement walls in Climate Zone 6 (High Park). With closed-cell spray foam at R-6 to R-7 per inch, 3 inches provides R-18 to R-21 while also acting as your vapour barrier—no additional poly sheeting needed.
For finished or semi-finished basements, insulate the walls to bring the space into your home's thermal envelope. Ceiling insulation is only recommended if the basement will remain permanently unheated and unconditioned.
Yes. Closed-cell spray foam at 2 inches or more acts as a Class II vapour retarder, preventing warm interior air from contacting cold foundation walls where condensation forms. This eliminates the musty smell and mould risk common in High Park basements.
Basement spray foam in High Park typically ranges from $2.50 to $4.50 per square foot depending on foam type, thickness, and access. A typical 1,000 sq ft basement costs $2,500 to $4,500. We provide free quotes with exact pricing.
For High Park basements, we almost always recommend closed-cell spray foam. It provides R-6.5 per inch, acts as a vapour barrier at 2 inches, resists moisture, and adds structural rigidity. Open-cell is only suitable if the basement is already dry with verified exterior waterproofing.
Active water leaks must be addressed before insulating. Closed-cell spray foam handles normal moisture vapour migration through concrete, but bulk water entry from cracks or failed weeping tile needs to be fixed first. We assess moisture conditions during your free site visit.
Most High Park basement spray foam jobs are completed in one day. A typical full-basement application (foundation walls and rim joists) takes 4–6 hours including prep, application, and cleanup.
Yes. After spray foam cures (24 hours), you can frame directly over it or against it and install drywall. The foam itself acts as the vapour barrier, so no additional poly sheeting is needed behind the drywall.
Get Your Free Basement Insulation Quote
Serving High Park North, Roncesvalles, Bloor West Village, West Bend, Swansea, and all of High Park area. Same-day site visits available.